Prepare
Define target karat, colour, process and finished-metal requirement.
Process
solutions.
Follow the complete production route: prepare the precious-metal charge, create a uniform melt, cool into a controlled structure and verify the result before the next operation.
VIEW THE COMPLETE PROCESS ↓
Begin with a controlled addition.
Fine gold provides the precious-metal base. KINGOLD master alloy supplies the balanced components needed for the target karat, colour and production behaviour.
Fine gold+Master alloy=Target alloy
Four stages. One uniform matrix.
Melt
Combine fine gold and master alloy under a controlled cycle.
Cool
Cast and cool for a stable, workable structure.
Verify
Confirm composition, weight, colour and hardness.
The designed alloy takes form.
After complete mixing, the molten alloy is poured and cooled into production material. The illustrated 10 g result represents batch recovery; actual yield depends on calculation and process control.
- OUTPUT
- Uniform alloy
- CONTROL
- Weight & composition
Verify by hydrostatic weighing.
Water weighing estimates density from weight in air and apparent weight in water. It supports process verification; exact composition should be confirmed by an appropriate analytical assay.
Density checkWeight controlAssay confirmation
The photographs are conceptual process illustrations. Adding master alloy changes composition and karat; final ratios must be calculated for the specified alloy grade, target fineness and production route.
DEFINE YOUR TARGET